This affordable in ear monitor SIEM-2 system has been waited for long time as more performers used to having in ear monitor instead of relying on wedges. The SIEM-2 breaks the price barrier for every musician.
IE-1
* This wideband dynadriver earphone reproduces full range of frequency, natural mids, and full highs and bass. It delivers sound musicians want and should be heard with full detail.* Three pairs of silicon sleeve are provided with different sizes for best fitting and sound isolation.
* Human friendly mechanical structure ensures long time fatigueless wearing.
* Ergonomic design for long-time wearing without fatigue.
| SIEM-2T |
| Carrier Frequency Range | 502~960 MHz |
| RF Output Power | 10 mW |
| Nominal Frequency Deviation (modulation) | ±40KHz |
| Audio Input Impedance | 20kΩ |
| Nominal Input Level | -20 dBV |
| Maximal Input Level | 0 dBV |
| LED Display | AF Level, Channel |
| Audio Input Connector | 2 x Balanced XLR |
| Loop Out Connector | 2 x Ø6.3mm Balanced Loop Out Socket |
| Operation Voltage | 12-18 VDC, 600 mA |
| SIEM-2R |
| Frequency Preparation | PLL Synthesized Control |
| Carrier Frequency Range | 502~960 MHz |
| LED Display | Channel |
| Controls | Power On/Off,
Channel selection, Volume control |
| Audio Frequency Response | 40~18,000 Hz |
| Output connector | 1/8” Dummy stereo Phone Jack |
| Battery life | 14 hours typical |
| Battery | 2 AA batteries |
| IE-1 | |
| Frequency Response | 20~20,000 Hz |
| Transducer Type | Dynamic |
| Impedance | 16Ω |
| Sensitivity (at 1000Hz) | 114 dB/mW |
| Distortion | Less than 0.3% |
| Cord Length | 148cm with Ø3.5 stereo plug |
| Net Weight | 6 grams (cable excluded) |