DM5.0Pro
1, 2, 1, 2, check. Yes! - Its ON.
When using a professional microphone on stage or in the studio, the Engineer needs to have control from the mixing desk. If a mic ON / OFF switch position is changed without the Engineers knowledge, it can lead to big problems!
The DM5.0Pro solves this problem. It has no switch. With an “all-black” design, the DM5.0Pro is discrete on-stage and does not detract from the performance.
DM5.0Pro uses the same great sounding capsule from the DM5.0s. It also uses the same great road-ready construction as the DM5.0s but, without the potential confusion which can be caused by a switch.
| Model Name | DM5.0Pro |
| Transducer type | Dynamic |
| Frequency Response | 50 Hz – 12 KHz |
| Polar Pattern | Super cardioid |
| Output Impedance | 600 Ω |
| Sensitivity | -52 dB (0 dB=1 V/Pa) |
| Off axis rejection | >20 dB at 180° |
| Maximum SPL | >135 dB |
| ON/OFF Switch | No |
| Switch colour | n/a |
| Pop Shield colour | Black |
| Body colour | Grey |
| Cable / Connector | 3 pin gold plated male XLR |
| Polarity | Pin 2 hot |
| Housing | Solid cast metal alloy |
| Supplied cable | 5.0 meter XLR (f) -> XLR (m) |
| Weight | 300 g |


